Project Farm
Project Farm
Project Farm

The Project Farm channel creates content about using alternative fuels, engine additives, epoxies, testing shop tools, etc. This channel has awesome Patrons and does not want commercial sponsorship or free items from manufacturers. Hope you enjoy the videos.
Feel free to comment, like and subscribe. Let me know what you think!
Project Farm, LLC 2020

نظر
  1. Prashant

    Prashantپیش 3 ساعت

    Are u able to commet on 87 vs 93 octane fuel efficiency / mpg and longevity for Turbo engines vs naturally aspirated?

  2. Winch Truck

    Winch Truckپیش 3 ساعت

    I think it would be interesting for many of your followers to see a gasifier at work that would be when you have no fuel such as propane or gasoline build a gasifier and use wood smoke not something you can do overnight but it would be interesting to see your perspective on that thank you and have a great day and thanks for all the great videos

  3. Me ole me

    Me ole meپیش 3 ساعت

    While this is all nice and fun, I don't think Shell claims their gas will run better in a low compression generator or 2 cycle lawnmower. The real test would have to be on a typical higher compression fuel injected car and have the emissions and mileage recorded.

  4. typetbg

    typetbgپیش 3 ساعت

    Good work! How about testing some power banks?

  5. propstrikerc

    propstrikercپیش 3 ساعت

    Could you test castor oil as an engine lubricant please. I use it in model engines as well as high performance 2 stroke race engines. It supposedly has high film strength and mega protection against overheating and lean runs. How does it compare to modern synthetic oils? I know it would win the smell test. D: Keep up the good work, there is no other channel like this one.

  6. Jacob Ramirez

    Jacob Ramirezپیش 3 ساعت

    Awesome sauce... Keep up the good work!

  7. Jetmech0417

    Jetmech0417پیش 3 ساعت

    While I appreciate the engine dying at virtually the exact same time for both tests, these tests are far from as accurate as a lab would be. You test in real world applications with variables being very much in play, which I do like, but a lab is going to control the variables as much a possible for a completely even test. It's just sheer coincidence that the run time was 50:44 for both tests. Even a 1 degree F difference in ambient temperature will skew these kinds of test results. I'd personally like to see each configuration ran 5 or more times to get a mean, a median, a high, and a low. That goes for each test. Not just the runtime test.

  8. Mahesh Bhenchod

    Mahesh Bhenchodپیش 3 ساعت

    35mph is plenty for a bicycle. Awesome!! I usually would vote 2-stroke for small engines but in this case, the 4 stroke is the way to go. Quieter, easier to maintain, no clutch, same speed, better mpgs... just as fun!

  9. matthewsaluh

    matthewsaluhپیش 3 ساعت

    My accusharp gets my knives sharp af. Could be technique

  10. Jetmech0417

    Jetmech0417پیش 4 ساعت

    Can you do fuel and oil additive brackets like you did with the engine oils?

  11. Phill Gaston

    Phill Gastonپیش 4 ساعت

    If you have a huge gap or complex shape, I have had luck using the bottom corner of a plastic soda bottle as a leave in form.... Mine is over a motorcycle slave cylinder so heat isn't much of an issue.... Stands up to the motor vibs + my steel toed boots tapping it constantly

  12. John Attinello

    John Attinelloپیش 4 ساعت

    Did you ever try a Lenox blade?

  13. Enterprise’s Modelling Channel

    Enterprise’s Modelling Channelپیش 4 ساعت

    but can they *dry underwater?*

  14. Andy South

    Andy Southپیش 4 ساعت

    Nice one!

  15. kilner79

    kilner79پیش 4 ساعت

    please try this Xado Turbo Verylube

  16. Clarence Smith

    Clarence Smithپیش 4 ساعت

    Yes,add triple A and Rechargeable. Excellent testing.

  17. Coding The System

    Coding The Systemپیش 4 ساعت

    Try building a Go Kart with no welding or bolts, just adhering everything with JB-Weld!

  18. Justin Ashcraft

    Justin Ashcraftپیش 4 ساعت

    Absolutely love your videos I’m a mechanic myself and I love your curiosity and drive to test the things you do pure internment and curiosity satisfaction to me

  19. Ellis Schwarz

    Ellis Schwarzپیش 4 ساعت

    This is just crazy enough to get addicted to watching

  20. narcisse Cardinal

    narcisse Cardinalپیش 4 ساعت

    i took my truck to the shop thinking if i had any fuel problems they said it can be the gas i am using so i an thinking maybe its just build up maybe ? my truck sounds like it wants to turn off going up a hill

  21. Vasil Shterev

    Vasil Shterevپیش 4 ساعت

    Respect for your work!!! From all your videos I have seen Engine Restorer performs best in the compression test. In your opinion is there an additive that will perform better in the compression test? Best regards!!!

  22. Tony Bennett

    Tony Bennettپیش 4 ساعت

    Excellent video Sir, regards Tony GB

  23. BeeZee2

    BeeZee2پیش 4 ساعت

    FYI, the HF pump has one huge flaw... the coiled plastic air hose gets brittle and crumbles withing a couple of years.

  24. steve lemley jr

    steve lemley jrپیش 4 ساعت

    Are you using cocoa cola as an oxidizer

  25. Carl Ray

    Carl Rayپیش 4 ساعت

    It might be a little cheaper to just run a tank of shell in your rig every couple of months rather than using an additive. I love your videos. Please keep up the good work.

  26. Andrew Mccrossan

    Andrew Mccrossanپیش 4 ساعت

    I feel the fire test should have been done alone. No telling what the heat could have done to its competitors.

  27. Ray Miller

    Ray Millerپیش 5 ساعت

    I would like to send you a time that would start/stop power to your lubrocity tester. You can set it to run for as little as a second to 60 minutes. It would increase the accuracy of your tests. This timer can handle a startup current of 1800 watts and it can handle a continuous load of 1100 watts. I'd like to give it to you to use in your future testing.

  28. Masterof Gaming

    Masterof Gamingپیش 5 ساعت

    2 stroke engine souds like gta san moutain bikes

  29. AW Gaming - Football and more

    AW Gaming - Football and moreپیش 5 ساعت

    7:43 ah, yes. I love to cook my tape.

  30. black hmz

    black hmzپیش 5 ساعت

    👍

  31. MyLifeWithAndroid

    MyLifeWithAndroidپیش 5 ساعت

    Could you do the same exact thing with Lucas oil ? I would love that

  32. Steven Sevek

    Steven Sevekپیش 5 ساعت

    If it's a GDI engine it likely won't help to clean the intake valves, would it?

  33. Denis Giguere

    Denis Giguereپیش 5 ساعت

    you need a turbo if you want the engine run

  34. The Texican

    The Texicanپیش 5 ساعت

    If you can any product left you should do a video on how each product throws off the balance of a wheel and at what speed its more noticeable.

  35. MADD0G 281

    MADD0G 281پیش 5 ساعت

    I have a good one for you!! Plastic bumper restore on cars!! What’s is better!!?? What is more durable??!! And what last longer / which offers more protection while restoring the black in the bumper

  36. Mark Stump

    Mark Stumpپیش 5 ساعت

    That engine finally had enough of your shit :D

  37. ReelX4U

    ReelX4Uپیش 5 ساعت

    Can you do side by side comparison with the normal “Mobil 1 Full Synthetic Oil” change at “3,000 Miles or 3 Months” with the “Mobil 1 Full Synthetic with Extended Performance” formulated to last “15,000 Miles or 6 Months”?

  38. nasser d

    nasser dپیش 5 ساعت

    I have one cheapo makita battery. They do not run as good as makita batts. Buy they are ok for the price. I would not rely on cheap batts. But having a few on the van just to top up is ok

  39. Jeffy Mario

    Jeffy Marioپیش 5 ساعت

    His impact went pew pew pew

  40. M D

    M Dپیش 5 ساعت

    Lucas makes good stuff. I know a lot who swear by the red and tacky.

  41. Kevin Navitas

    Kevin Navitasپیش 5 ساعت

    Could you try an experiment that would see if other types of oils would suffice? For example, vegetable oil, lard, coconut oil, Vaseline, moisturizer, etc.

  42. Jason i love oz

    Jason i love ozپیش 5 ساعت

    Strip that baby down to frame and make a mad Max beast.also you would end up with the coolest hen house

  43. Andrew Susskind

    Andrew Susskindپیش 5 ساعت

    anyone wanna provide me with the cliffnotes? buy the overpriced dewalts or can i go out and get some off brands lol

  44. Walter Coe

    Walter Coeپیش 5 ساعت

    One thing to add to videos like this would be to measure the consistency of cutting force required for new blades. This could be done by measuring several (like 10) new blades of each brand to see if they are all the same. If there is variation from blade to blade of a given brand then you can't use new blades for different tests and compare them to the measured "new blade" value as they might not have started off at the same required force. Great videos though, I really appreciate it!

  45. Flatus Antiquitous

    Flatus Antiquitousپیش 5 ساعت

    I wish that the hose was setup for a spray pattern that better simulates rain and road spray. The stream of water that made those metal frames look so bad is not a real good replication of normal conditions. I have a feeling that some of the frame types may not have performed quite so badly in actual conditions.

  46. Cam O

    Cam Oپیش 5 ساعت

    Can you compare 4 stroke motorcycle oil to Rotella T6? It has the Jaso MA-2 rating like the motorcycle specific oil, but is much cheaper. We need definitive proof that the T6 is good for wet clutches on dirtbikes!!! Also, then I could use the same oil as my truck lol. (Seems weird)

  47. RA M

    RA Mپیش 5 ساعت

    If I pour this into my clutch will it help stop slipping! Baboom - just kidding.

  48. Michael Rohrbaugh

    Michael Rohrbaughپیش 5 ساعت

    Would you please do a diesel engine oil friction bearing test, between standard oils, then synthetic blends and full synthetic oil s. I'll and the channel will support it I'm sure. Then figure out a trans fluid test and test some fluids. Shell vs Mobil delvac vs delo...

  49. Cam O

    Cam Oپیش 5 ساعت

    I used the FR3 in my LLY Duramax last oil change, and I immediately noticed it was quieter. Much less clacka-clacka. Can't say if fuel mileage was affected as I usually drive it like I stole it.

  50. dielauwen

    dielauwenپیش 5 ساعت

    Cows like trombone sounds ! One farmer on youtube has a Cow party. They dance around and hump to Trombone music.

  51. House of Killy

    House of Killyپیش 5 ساعت

    Call the rv "the rust bucket "

  52. Iron Golem

    Iron Golemپیش 5 ساعت

    I think the noload engine test doesn't tell you much. The fuel injection system delivers the amount of fuel needed to maintain a preset engine speed. Under-load, it has to vary the fuel delivery to keep the engine at the governed speed. A significant load plus engine bearing-surface frictions and the differences in friction modifiers in the oil and additives, may give you the info you are looking for.

  53. ALFREDO

    ALFREDOپیش 5 ساعت

    The Perma Seal bucket had a clear gap at the bottom that you missed spraying and where it started leaking. I'm afraid you're going to need to repeat the Perma Seal part of your experiment.

  54. Mauro ObSon

    Mauro ObSonپیش 5 ساعت

    i like oil races :D

  55. JP O

    JP Oپیش 6 ساعت

    Switched to Mobil synthetic in the late 80's on a 1984 Chevy S10 4X4, small V6. Leaked like a sieve. Put synthetic HD oil in my 2002 1200 Sportster after years of standard HD, both 20W50. Again, stared leaking like a sieve. Neither vehicle leaked oil prior to the change, or if they did it was unnoticeable. As a side note, I use synthetic oil in all of my vehicles and motorized equipment, love it. For some reason, my older stuff didn't.

  56. alex sim

    alex simپیش 6 ساعت

    How dare u question the king Phil swift

  57. Will. Faurie

    Will. Faurieپیش 6 ساعت

    Cant wait till you hit 1 mil subs. You deserve it

  58. Will. Faurie

    Will. Faurieپیش 6 ساعت

    Again... an incredibly detailed and very informative video. Definetly my favourite youtuber. Please put a cheap turbo on the farmabago

  59. Kurt Young

    Kurt Youngپیش 6 ساعت

    I stopped at 3:00 to mention it may have been better to run the engine for about 30 to 60 minutes with the additive before comparing it to allow the blending and bonding.

  60. Masterof Gaming

    Masterof Gamingپیش 6 ساعت

    Nigga what the f

  61. NikTheGeek

    NikTheGeekپیش 6 ساعت

    I hadn't come across JB Weld until watching your videos. I'm now a convert and keep a small stock of it handy for those times I need something I can trust. So thanks for the heads-up and the tests!

  62. Ticks Tricks

    Ticks Tricksپیش 6 ساعت

    Can we get a 6 month check up on that wrench that you were going to leave outside :P I would love to know if it really has helped prevention of rust and for how long it lasted.

  63. Jack Braddell

    Jack Braddellپیش 6 ساعت

    If Bosch owns Freud Diablo that are ridiculously overpriced, do they have a comparable reasonably priced Bosch branded equivalent ????

  64. mukusman

    mukusmanپیش 6 ساعت

    Can a test be run on lucas products engine oil stabilizer?

  65. KJ Denesha

    KJ Deneshaپیش 6 ساعت

    Well done! Wish you find a sponsor. You’re thorough and concise. Great data and ideas. Keep it up! Hope to keep seeing your reviews.

  66. Bryan M

    Bryan Mپیش 6 ساعت

    I can smell this video

  67. Steven Fox

    Steven Foxپیش 6 ساعت

    I think lane 2 has an unfair advantage

  68. Chris Schultz

    Chris Schultzپیش 6 ساعت

    Finally someone who takes into account the fact that the liquid sticks to the containers and is left behind.

  69. Gerald Koch

    Gerald Kochپیش 6 ساعت

    Do have one on oil filters?

  70. Muhammad Haider

    Muhammad Haiderپیش 6 ساعت

    Make a video on Flex Paste now

  71. Aymen Atiyah

    Aymen Atiyahپیش 6 ساعت

    U have to close the intake with the straw still in it

  72. John Franco

    John Francoپیش 6 ساعت

    Can you do a video using HEET as engine gasoline?

  73. Kirk Adkison

    Kirk Adkisonپیش 6 ساعت

    I have learned so much from this channel - thank you very much

  74. M D Adams

    M D Adamsپیش 6 ساعت

    Key is UP TO which means at best (probably when using poor quality oils)

  75. Jack Braddell

    Jack Braddellپیش 6 ساعت

    Fantastic Video, and public service. Hats off to you !!!

  76. VoV

    VoVپیش 6 ساعت

    widepeepohappy :point right: pvc

  77. KEITH KUHN

    KEITH KUHNپیش 6 ساعت

    You rock Todd You do the best and most thorough testing I've ever seen in my life. Keith Kuhn

  78. Jack Braddell

    Jack Braddellپیش 6 ساعت

    How about same test with Makita or Milwaukee.

  79. Jack Braddell

    Jack Braddellپیش 6 ساعت

    Good to know about Vanon

  80. TheMatm12345

    TheMatm12345پیش 6 ساعت

    Well I was just about to grease the front end of my truck but now I’m wondering if I need to go get a tube of lucus 😂

  81. AM 1967

    AM 1967پیش 7 ساعت

    My friend you just prove what a FAT liar the fed government is!

  82. Raymond Lo

    Raymond Loپیش 7 ساعت

    it does reduce the friction, as I can see the money is slipping away from the wallet

  83. Dustin Roberts

    Dustin Robertsپیش 7 ساعت

    What have you tested for oil additives / stabilizer is Lucas vs motor restore ?

  84. Lee Brewer

    Lee Brewerپیش 7 ساعت

    Excellent video - thanks for the fun time! A serious look into the hydrogen systems would be good. Back in the 90s I built a crude HHO generator and put it under the hood. I went from 200 miles per tank to 400 miles per tank on a 78 Chevy Caprice. People tend to ridicule these systems, without trying them, b/c they don't understand what is happening and say you are somehow creating extra energy for free - which you are not. The electrolysis simply breaks the bond of the water molecules with the result of the two most flammable gases being produced. Burning these gases for fuel is what increases the mileage. Its similar to the trigger of a gun releasing the energy pent up inside the gunpowder of the bullet. It takes very little to pull the trigger, but the result is a lot more deadly than the trigger pull's input energy. BTW - and I am not affiliated - there is someone on eBay selling these complete systems if you would not want to go into building one from scratch. I have had one of my own on several vehicle thought the years and had great results.

  85. Geoff Hilton

    Geoff Hiltonپیش 7 ساعت

    You should have 100 million subscribers, everyone needs to know about your channel.

  86. Bruce Erdman

    Bruce Erdmanپیش 7 ساعت

    Any way to test regular different brands Battery s for leaking. seems like i have had more problems with Duracell ruining my equipment. A dead battery is ok but a leaky battery ruins you day. I heard lithiums don't leak . is this true? Thanks I enjoy your channel

  87. Gixxer983

    Gixxer983پیش 7 ساعت

    You make amazing videos and i watch them regulary, but this one you pretty much did most of it wrong. As a biker myself, i do maintenance on my motorcycles myself and over the years i have tested many products. First let me explain how a motorcycle chain is made regarding lube. The chain comes out of the factory with grease behind the Xrings and the motorcycle and the chain manufacturers instruct you to clean the chain with kerosine and lube with 95 gear oil and then wipe the excess off.(parts cleaner over time ruins rubber ) The reason why we put something on the chain is for the purpose to prevent rust and so the rollers on the chain dont wear out the sprockets fast, ( and thats it ) . Now ofc we dont follow the instructions as there are much easier and faster ways to apply the lube ie- chain lube cans. And in all my years of testing different ones , the two best ones are 1: Motul MC Care C2+ and 2: Castrol chain lube Racing These two provide the best (stickyness, roller lube and anti fling properties of them all) Also chain lube is applyed on the inside of the chain so the lube works its way out thru the chain by centrifugal force and not fling it`s way out in the first minute of riding. PS: You can put pretty much any bike lube on a bicycle since the centrifugal forces are low. An electric motor, 2 sprockets and a chain on a bench would be much more accurate for the testing. Take this comment as constructive as i realy love your videos and enjoy them very much.

  88. Dale Skelton

    Dale Skeltonپیش 7 ساعت

    Gorilla tape will peel pain off vehicle if on it long enough

  89. Geoff Hilton

    Geoff Hiltonپیش 7 ساعت

    Do you have a scientist background? as your tests take some beating for practical usefulness, great channel by the way.

  90. Kayvan Claudio

    Kayvan Claudioپیش 7 ساعت

    I want to send you oils for you to test for me, how can i do that?

  91. Clay

    Clayپیش 7 ساعت

    Project Farm, as others have stated, I'd love to see a "manufacturer's" vs aftermarket fluid comparison. My F150 needs an engine/differential oil change and I'm wondering if I need to stick with Motorcraft. Thanks for doing what you do!

  92. Morgan Sedge

    Morgan Sedgeپیش 7 ساعت

    It's a very interesting video i have had problems with Loctite for example not only they don't have something in the cap to stop the nozzle going hard most times but also even when stored correctly the tube goes all hard plus it's more expensive and i have contacted them before about Loctite super glue... I usually use cheap cyanolite kind of glue (not branded Loctite) or for though stuff epoxy resin i cut off the bar and mix up... Also it's possible to use hardener on Loctite

  93. James Matthews

    James Matthewsپیش 7 ساعت

    I used it one time in my Ford truck before it had no leaks now I have a rear seal leak so I don't think it's a good idea to switch.

  94. James Matthews

    James Matthewsپیش 7 ساعت

    That's a nice tractor

  95. SynKronos

    SynKronosپیش 7 ساعت

    Would never have thought it would burn and then those of who know what diesel can do to hot a petrol engine- blow the head right off might also have so said no go.

  96. tony monastiere

    tony monastiereپیش 7 ساعت

    Just going to stay with Pennzoil, M1 and Castrol. Thnx for new product updates.

  97. pdxrockies

    pdxrockiesپیش 7 ساعت

    I've been looking tofoward to this as well

  98. Eric Petrovich

    Eric Petrovichپیش 8 ساعت

    Would love to see the lubricity test between the cooked Mobile 1 and the cooked FR3 additive, since the FR3 additive lost so much more in the heat test.

  99. Shara Royer

    Shara Royerپیش 8 ساعت

    Where are men like this...I hope his wife feels blessed for someone who isn't an idiot and can do so much

  100. Bert Grau

    Bert Grauپیش 8 ساعت

    I love the way you make what you need when you can instead of buying it. A very good used for an old injector